Blog

A short tutorial video on how-to use the Ultraprobe 3000 KIT ultrasonic inspection system. The unit displays dB levels with readings that can be stored and downloaded. A tone generator is supplied together with a stethoscope probe and a rubber focusing probe. Interface software to download readings is also supplied.

An introduction to the Polysonics Hydra SX30 which covers what is included in the kit and how to setup the clamps, transducers, cables and instrument to conduct flow measurements. 

Using the Megger range of Insulation Testers including the MIT525, MIT1020, MIT1025 and MIT1525 you can conduct the following;

Spot Reading, Time vs Resistance, Polarization Index, Step Voltage, Ramped Voltage & Dielectric Discharge. 

This video details how to take a loss measurement with the Fluke SimpliFiber Pro.

This video explains how to set up and reset the Fluke ScopeMeter 204.

This video provides a brief introduction to the Flir T-Series Thermal Cameras.

his video highlights the key features of the Fitel S179 Core Alignment Fusion Splicer and Cleaver.

This video demonstrates how to use the “Power the Loop” feature on the Emerson AMS Trex Device Communicator.

The Hilti PS1000 X-scan is a GPR system with 3 transmitters and 5 receivers that has been designed to provide a 3D image of the location of reinforcement bars and other metallic and non-metallic objects in concrete. The unit is accurate to ±10 mm and will measure to a depth of 300 mm, using both Quickscan and Imagescan functionality.

A quick summary of the TMS 9110D Portable Vibration Calibrator.

This video demonstrates how to conduct a copper certification using the TestPro CV100-K50.